machine won't post to the screen.

[elvis8900]

I have a Gigabyte GA-H55M-UD2H motherboard. It has a i3(socket 1156) core intel processor, and a nvidia GTX 1060 graphics card. It won't post anything to the display anymore.If I can gather anymore information for you I will. My question is how do I get it to POST to the screen again?

 

[rocktalkrock]

1. Have you cleared the CMOS?
2. Have you tried removing the graphics card and boot using the internal graphics instead?

 

[elvis8900]

I've:
replaced the mobo cmos battery.
swapped out two different sets of RAM.
unplugged drives to reduce power supply use.

 

[rocktalkrock]

I've:
replaced the mobo cmos battery.
swapped out two different sets of RAM.
unplugged drives to reduce power supply use.

1. Have you checked the boot order in the BIOS?
2. Did you try removing the graphics card and boot using the internal graphics instead?

 

[elvis8900]

I will take it and remove components systematically. I am not going to do it now. People are trying to sleep here.

 

[elvis8900]

I opened up the case took out the video card.It was able to get the machine to POST. I put the video card back into the machine. I was operating fine for about 5 hours. Then both screens went black> I had to shut off the machine manually.Now the machine won't post again.

 

[rocktalkrock]

I opened up the case took out the video card.It was able to get the machine to POST. I put the video card back into the machine. I was operating fine for about 5 hours. Then both screens went black> I had to shut off the machine manually.Now the machine won't post again.

That sounds like the computer could be overheating. What is your power supply? What version of Windows are you using?