Making more case fan plugins.

[IGetKillsFTW]

So my motherboard seems to only have like 2 case fan plugin spots. Is there a way to make one of fhe other spots into a case fan plugin with some adapter?

 

[faalin]

you can buy a Y splitter, I would not plug more then 2 fans in on a single fan header. They are normally rated at about 1amp per header and the average fan is normally .3 amps

 

[scout_03]

you could also get a fan controller to had more fan in system .

 

[geofelt]

Two good suggestions above^^
Add to that a fan to molex adapter so you can connect the fan directly to a molex lead on the psu.
Here is one example:
https://www.newegg.com/Product/Product.aspx?Item=N82E16812423171&cm_re=molex_to_3_pin_fan_adapter-_-12-423-171-_-Product

 

[faalin]

If your looking for a fan controller I would recommend this one https://www.amazon.com/gp/product/B00GKTK8JS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Have it running in my case now and comes with cable extenders and thermal sensors. If your going the controller way then don't cheap out, the cheap ones the voltage regulators go out on easily.

At 30w per channel you could easily run about 40 fans on this one controller.