Question Matrexx 50 and SSD disk

[Braveorc]

I got a new pre built computer in a Matrexx 50 casing.

I would like to add a second SSD disk but i cannot find information how to do that.



Not sure where to install the SSD, i only find 2 slot for 3.5 disk.
Can i use any SSD disk? i would like maybe WD blue ssd 500gb



Anything i need to fix ssd somewhere in?

On it's official site it says there is 4 slot for it.



Thank you.

 

[rgd1101]

get a 2.5" to 3.5" bracket

 

[tennis2]

You buy a 3.5" to 2.5" slot adapter.

For SSDs, some velcro tape works just as well also if aesthetics aren't a concern.

 

[Braveorc]

You buy a 3.5" to 2.5" slot adapter.

For SSDs, some velcro tape works just as well also if aesthetics aren't a concern.

But i mean, can't i use the already existing slot for ssd, there is 4 available but i just can't figure how to use them.

You can see on the website
https://www.deepcool.com/product/case/2019-04/9_10862.shtml

 

[rgd1101]

there is 4 2.5" spot for ssd

 

[tennis2]

Soooo? You can't figure out how to mount the 2.5" SSD to the back of the mobo tray like so? I'm not sure what you're asking.

 

[Braveorc]

Soooo? You can't figure out how to mount the 2.5" SSD to the back of the mobo tray like so? I'm not sure what you're asking.

Yes, but i think i found.
I need to screw the disk from the back through the plate
But i was not sure which side to put the disk.
On the motherboard side or the back side where there is the cover and all the wires.
There is enough room on both sides.

 

[tennis2]

Your choice really. Most people choose the back side to hide the power and data wires going to the drive(s)