[SOLVED] Matrexx 55 Fans not spinning

[JoshM11]

The LEDs work on all of them and are changeable with the top case button but none of them will spin, ive got the 2 pin connected to the PSU which was powering the LED the only thing i have loose is a 4 pin female adapter, if anyone has any idea why please help, thanks.

 

[Vic 40]

Need to connect that 4pin to a motherboard header.

 

[JoshM11]

Need to connect that 4pin to a motherboard header.

the only header i can see is beside my cpu fan and it’s an 3 pin

 

[Vic 40]

Which motherboard?

Don't know if you have this particular example of that case so just look,
[Build Guide] How to connect RGB fans with Matrexx 55 Case - YouTube

 

[JoshM11]

Which motherboard?

Don't know if you have this particular example of that case so just look,
[Build Guide] How to connect RGB fans with Matrexx 55 Case - YouTube

So i plugged the 4 pin into the 4 pin cpu slot and got the fan i plugged i to spin, but the leds weren’t on because the molex was unplugged, i cannot reach the 3 fans to the motherboards and the fan spot on the motherboards has only 3 pins

 

[Vic 40]

According to that video are there connections on the back of the case to connect all three cables to a cable splitter, so means you would only have to connect one connector to the motherboard.
And don't use the cpu fanheader,this is for the cpu's cooler. Use a different one on the motherboard. Think every motherboard has at least one extra fanheader.