hi im having this major problem with this board.
runs ok on "DEFAULT" but if i try setting it to "MANUAL" i get the "chasis intruded! fatal error system halted" error.
ive tried increasing volts ive tried moving the chasis jumper lead ,ive replaced the battery, ive reset cmos hundreds of times but nothing seems to work. also there are no settings for this in bios.and i have the latest bios and tried other bios versions. still doesnt work.
"if i cant set it to manual then i cant run my ddr2 1066 ram at 1066mhz instead it will run at 800mhz"
like i said voltages cant be increased without getting that error. ram is brand new.everything else test fine and ive tested the board with other ram (corsair xms2 ddr800 )and i still get the error.
so basically i cant overclock and cant run my ram at its stock settings .
please note that this cant be a chasis jumper lead issue as it does work on default . it only fails with that error if set to manual.
any advice will be much appreciated.
thanks adya
__________________
maximus formula s.e / 2x1gb ddr2 1066 crucial ballistix /x6800 core2 / 8800 gt /supreme fx II /2x80 gb raptors /thermaltake 850watt psu / zalman 7900 nt
runs ok on "DEFAULT" but if i try setting it to "MANUAL" i get the "chasis intruded! fatal error system halted" error.
ive tried increasing volts ive tried moving the chasis jumper lead ,ive replaced the battery, ive reset cmos hundreds of times but nothing seems to work. also there are no settings for this in bios.and i have the latest bios and tried other bios versions. still doesnt work.
"if i cant set it to manual then i cant run my ddr2 1066 ram at 1066mhz instead it will run at 800mhz"
like i said voltages cant be increased without getting that error. ram is brand new.everything else test fine and ive tested the board with other ram (corsair xms2 ddr800 )and i still get the error.
so basically i cant overclock and cant run my ram at its stock settings .
please note that this cant be a chasis jumper lead issue as it does work on default . it only fails with that error if set to manual.
any advice will be much appreciated.
thanks adya
__________________
maximus formula s.e / 2x1gb ddr2 1066 crucial ballistix /x6800 core2 / 8800 gt /supreme fx II /2x80 gb raptors /thermaltake 850watt psu / zalman 7900 nt