MeMOK stays red, no signal...

Otomon

Commendable
Jul 17, 2016
3
0
1,510
So I was using my pc last night, everything was fine. Today I came home after work, booted it up and screen stays at "No signal". Everythimg seems to be spining properly, light on Asus mobo is green. However there is another light in it that says "MemOk D_Ram_Led" which stays in red...Im pretty sure this is the culprit, however wanted some secon opinions before I carry this rig on a 1 hour bus ride to nearest comp shop. And yes, I tried changing monitors/video cards to rule that out...is there a way also to know if its the mobo besides the led in it staying green?
 


How would I do that if I am getting no signal?
 
I should mention, I did try switching the 1 stick of RAM I have around to the same results, also holding the MemOK button makes the ligth flash, and a third ligth on the mobo which says CPU_LED flashes red once, which I am guessing just means its reconizing there is something wrong with the computer
 


The trouble shoot for your issue has only just began and you marked me down.?
MemOk D_Ram_Led usually indicates a problem with your DIMMs and weather you use another system to do this if you can. That's for you to decide.
Now you have CPU_LED lit, well good luck with that.
 


Didnt meant to do that, Im using a laggy old laptop to post here, can barely move mouse around without lagging x_x