[SOLVED] Memory compatibility issues?

[Floydfix]

I have built a new system with a
New Gigabyte ga-a320m-sh2 motherboard
Used Ryzen 5 1400
Video card something

Point is, when I get my memory in the mail that is the right 3200 MHz for my Mobo support and plug it in, I get memory beep codes (one long and 3 short) .
With it being only one stick and giving me the same beep codes in each slot, I did some digging and read that possibly the 3200mhz was too fast for the Ryzen 1400, so I went to Best buy and bought 2400 MHz 2*16gb Corsair vengeance and get the same beep codes.

I have been troubleshooting the hell out of this thing. As the memory is the only thing left in the computer, am I just missing something stupid?

Why can't I seem to get the right memory after following all of the specs from processor and mobo?

Thanks in advance for any help given.

Hope everyone is staying safe out there

 

[boju]

Beep codes relate to an AGP error (Video card). Could be faulty, incompatible or not receiving power.

 

[Floydfix]

Ok so, if I've tried multiple video cards and still get the same code, any other ideas?

 

[boju]

Which graphics cards have you tried and what's your psu?

 

[Third-Eye]

Ok so, if I've tried multiple video cards and still get the same code, any other ideas?

Make sure you plugged in the correct power cable to the motherboard and the GPU. CPU 4+4 or 8pin say CPU on the connector and graphics card power should say PCIE for 6 and 6+2 pin connectors.