[SOLVED] Memory Management BSOD help

[Tony3-1-9]

Hello, basically I am getting daily bsod with memory management BSOD. I have tried running windows memory diagnostic tool and there is no errors. I have also tried a fresh install of windows 10, bios reset making sure the xmp profile is disabled. When I get the bsod I often get 2 or 3 more bsod one after the other on restart. Eventually the pc will boot and I can game use it as normal. Sometimes when I get multiple bsod of death I do get system thread handle exception (dxgkrnl.sys & nvlddmkm.sys) I believe these are gpu related, I have used ddu to uninstall nvidia drivers and done a fresh install of the latest nvidia drivers but it still happens. The memory bsod gives the below error in the dmp file -

Arg1: 0000000000041792, A corrupt PTE has been detected. Parameter 2 contains the address of
the PTE. Parameters 3/4 contain the low/high parts of the PTE.

CPu is not overclocked (Not possible) Gpu is overclocked and applied on startup.
Specs-
i7 8700
2x8gb ddr4 corsair vengeance lmp 3000 runs at 2666 on my motherboard
Gigabyte 1080
Gigabyte b360m d3h-cf


any help would be much appreciated!!

 

[rgd1101]

make and model of the psu?
cpu temp?
run an memory test?

 

[Calvin7]

Since you don't provide a memory part number or link to what you bought. it's possible you bought two modules sold as Single modules which have no guarantee to be compatible together.

B360 Chipset does not use 3000MHz memory. You bought the wrong speed memory.