So, I built a new PC with these parts and when installing Windows 10 I got an BSOD Memory Management error.
I ran memtest86 with XMP on Auto(set to 4500MHz) and it gave so many errors that the test was aborted at 10.000 errors.
When I changed XMP profile to ON(set to 6000MHz) in BIOS and ran the test again, there was no errors found. Still, I can't access Windows after I restart the PC. Should I reinstall my Windows 10 again with the USB and test with XMP ON?
Motherboard: MAXSUN iCraft Z790 Wifi AX, Chipset Z790, Intel LGA 1700, ATX, DDR5
RAM: JUHOR DDR5 6000MHz 2x16GB
CPU: Intel I5 13600K
I ran memtest86 with XMP on Auto(set to 4500MHz) and it gave so many errors that the test was aborted at 10.000 errors.
When I changed XMP profile to ON(set to 6000MHz) in BIOS and ran the test again, there was no errors found. Still, I can't access Windows after I restart the PC. Should I reinstall my Windows 10 again with the USB and test with XMP ON?
Motherboard: MAXSUN iCraft Z790 Wifi AX, Chipset Z790, Intel LGA 1700, ATX, DDR5
RAM: JUHOR DDR5 6000MHz 2x16GB
CPU: Intel I5 13600K