Memory parity check error and Windows 10

[gotenksdcs7]

My pc reset to configure a Windows 10 update, when it came back on it hangs at the spinning dots. After it gets to repair mode it hangs at the dots even faster almost immediately.

My motherboard is beeping twice to signal a memory parity error. I'm at a loss at to how to fix it.

I've gotten a freshly hdd, and it freezes Windows installer as well.

I've tried onboard graphics, a different gpu. Nothing.

I've replaced the ram. Nothing.

Even with a brand new motherboard. Nothing. Just beeps for parity error and freezes at the same place.

Gigabyte z170x gaming 3
Gtx 1080ti
I5 6600k
Anarchy ddr4 2400 pc4 2×8
Evga 600b

 

[Colif]

Memory parity errors can be caused by failing hardware or outside elements disrupting how computer memory functions. Fixing parity errors involves removing the outside cause or failing hardware. A memory parity error means that one or more stored data values carries a different value when it's recalled than when it was stored. According to Cisco, parity errors are a type of data corruption. Parity errors offset the charge value and can bring back invalid or incorrect commands for the computer.

Correct Electrical Source Problems
Resolving parity errors may be as simple as connecting the computer to a different power outlet or replacing the surge protector. The computer's motherboard and power supply have built-in capacitors that can compensate for voltage irregularities, but the component is unable to compensate for poor power continuity. Additionally, the outlet and surge protector should be properly grounded to prevent power-surge damage to the random-access memory, which can cause parity errors.

https://www.techwalla.com/articles/how-to-fix-a-memory-parity-error

Could be your power supply. as it says, try different outlets and see if it helps. Or a new surge protector.