Hello,
I recently built a new configuration as follows:
CPU: Intel Core 2 Duo E4600 2.4 GHz
Motherboard: Gigabyte GA-G33-DS3R
Ram: Two sets of Corsair 2x1024-C6400-C4 (4 x 1GB dim; 4-4-4-12, 2T, 2.1 v, 800 mhz FSB)
Graphic card: ATI Radeon HD 3870, 512 MB DDR3
The memory fails dramatically on memtest, but this only occurs when the 4 dims are installed. I tryed every memory separately, then in groups of 2, groups of three, using all slots. The modules have also been tested by my local retailer and the same result: memory modules are ok, motherboard is ok. If i put the 4'th module in it fails. I tryed almost all settings i could imagine in BIOS but it still fails.
I may add that i don't want to overclock, i just need this damn system to work.
Can someone please help me?
Here are my bios settings:
I recently built a new configuration as follows:
CPU: Intel Core 2 Duo E4600 2.4 GHz
Motherboard: Gigabyte GA-G33-DS3R
Ram: Two sets of Corsair 2x1024-C6400-C4 (4 x 1GB dim; 4-4-4-12, 2T, 2.1 v, 800 mhz FSB)
Graphic card: ATI Radeon HD 3870, 512 MB DDR3
The memory fails dramatically on memtest, but this only occurs when the 4 dims are installed. I tryed every memory separately, then in groups of 2, groups of three, using all slots. The modules have also been tested by my local retailer and the same result: memory modules are ok, motherboard is ok. If i put the 4'th module in it fails. I tryed almost all settings i could imagine in BIOS but it still fails.
I may add that i don't want to overclock, i just need this damn system to work.
Can someone please help me?
Here are my bios settings: