Question Memory problem

[SATECH]

I have KINGSTON HyperX Predator DDR4 2x8 GB 3200 MHz (HX432C16PB3K2/16) kit, yesterday I have added KINGSTON FURY Beast 8GB DDR4 3200MHz CL16 - KF432C16BB/8 (single RAM), after few hours PC started crashing (BSOD). Any suggestions ? Solution.

Motherboard: ASUS ROG STRIX B450-F GAMING II
CPU: AMD Ryzen 5 2600X
PSU: Chieftek 700W

 

[kerberos_20]

reduce ram clock, something around 2666MHz should be stable with three sticks
check with memtest

MemTest86 - Official Site of the x86 Memory Testing Tool

MemTest86 is the original self booting memory testing software for x86 and ARM computers. Supporting both BIOS and UEFI, with options to boot from USB.

www.memtest86.com

 

[Bob.B]

I have KINGSTON HyperX Predator DDR4 2x8 GB 3200 MHz (HX432C16PB3K2/16) kit, yesterday I have added KINGSTON FURY Beast 8GB DDR4 3200MHz CL16 - KF432C16BB/8 (single RAM), after few hours PC started crashing (BSOD). Any suggestions ? Solution.

Motherboard: ASUS ROG STRIX B450-F GAMING II
CPU: AMD Ryzen 5 2600X
PSU: Chieftek 700W

Are you using all of the 16GB ram you have now?

 

[SATECH]

Yes I am, but is there any procedure when using 2x 8 Gb kit and single module 8Gb together

 

[Bob.B]

Yes I am, but is there any procedure when using 2x 8 Gb kit and single module 8Gb together

Proper bios and chipset driver?

Ram in the proper slots?

 

[SATECH]

Proper bios and chipset driver?

Ram in the proper slots?

Bios updated, chipset driver updated, slots in use 2 and 4

 

[Bob.B]

Bios updated, chipset driver updated, slots in use 2 and 4

Until you get this sorted it might be best to not use windows as a test vehicle.

You run the risk of trashing the data on your disk.

Use memtest86.
It must run error free.

Perhaps try bringing the ram speed down to 2933...test.

Does the manual call out a slot for the 3rd stick?