Memory stabilazation on ryzen

whateverdude

Proper
Jun 21, 2018
68
0
140
My memory is 3200Mhz.
On my ryzen system tho it runs on 2933.
If set to 3200Mhz is a bit unstable.
What adjustment can i try other than increasing DRAM voltage to make it stable?
 

whateverdude

Proper
Jun 21, 2018
68
0
140
Motherboard Model: ASRock X370 Gaming X
Module Part Number: F4-3200C16-8GTZB (x2)

I activate XMP 2.0
cannot overclock without XMP don't know why.

I know MB QVL has this memory at 2933....but that was long time ago when Bios was at 3.x
Now Bios at 4.x i can get 3200Mhz but not very stable.

 

whateverdude

Proper
Jun 21, 2018
68
0
140
Voltage don't do much.
I had it at 1.45v no dice.
AMD's official overclocking geek said it's no big deal to put it even on 1.5v so i don't worry.
Actually it passed microsoft's memtest on 1.4v, another proof that microsoft's programs are a joke.
Put it on memtest86 had a hail of errors.
Switched the command rate to 2T had only like 1% of the errors i had b4 but still.
Also i disabled geardown mode, since i have SMT disabled (ofc) it's useless anyway since it cannot sleep.
Then i tried to increase the timings but for some reason it did not boot.
Then i bumped up the SoC voltage and the Vcore voltage put it on 3066 and it worked.
Passed memtest86 8 times no errors .
Didn't try it at 3200 with increased SoC and Vcore because i was so happy with the performance.
Had even better score than 3200 in the benchmarks(probably because of the errors).
As for that they say that the 2T has worse performance than 1T i just don't see it.
I know it's just 5% memory speed increase but i have like 10% FPS increase in overwatch.
Not to mention the loading times on Vampyr...less than half compared with 2166 speed.
Incredible.