merit megatouch ducksan repair

[Guest]

Archived from groups: rec.games.video.arcade.collecting (More info?)

Monitor was dead, its a ducksan type 20 monitor.

According to merits website, replaced C804 with a 10 microfarad 50 volt cap
(original was a 1 microfarad). Note, this cap had been replaced before,
but had gone bad again (most likely from the heat from nearby components).
Also reflowed several cracked joints. I also replaced the cap right next to
C804 just in case heat had also thrown it out of spec.

Monitor fired right up after this repair.

Just thought I would post for people using google........

--
Mickster

Visit my website and see my arcade!!

http://mickster.freeservers.com

 

[Guest]

Archived from groups: rec.games.video.arcade.collecting (More info?)

I wrote a repair guide for the type 20 Ducksan. There are two versions
of this monitor: type 20 old and type 20 new.

 

[Guest]

Archived from groups: rec.games.video.arcade.collecting (More info?)

any chance you have a repair guide for the U3100 WG (type 67)

thats the one I need!!

--
Mickster

Visit my website and see my arcade!!

http://mickster.freeservers.com

"Ken Layton" <KLayton888@aol.com> wrote in message
news:1110083362.439846.258980@f14g2000cwb.googlegroups.com...
>I wrote a repair guide for the type 20 Ducksan. There are two versions
> of this monitor: type 20 old and type 20 new.
>