- Jun 12, 2015
- 67,208
- 7,041
- 168,140
So I am replacing my H100i 240mm AIO with a Arctic Liquid Freezer 360 and its front mounted...
Now I am curious if the 450mm tubing is long enough to get to the bottom of my case and fight its way past my 7900 XT. Cables from H100i (which are only 300mm) can easily reach top of the case but not sure about the bottom. I have more tubing to play with., 150mm (15cm, about length of a fan)
I found one photo of someone with a LF 420 installed in my case but they had a vertical mounted GPU and it was only a small gpu, so could route cables up behind GPU. Mine is 3..5 slot, thats not going to happen.
Current PC - https://au.pcpartpicker.com/list/FFMs89
Case Fractal Design Meshify S2 (case so old the page for it is just info now)
AIO - Arctic Liquid 2 Freezer 360mm AIO
GPU - Powercolor Red Devil RX 7900 XT 20gb OC (338mm long)
there is a gap between the end of GPU and Radiator... new radiator is thicker though. I might be able to run cable next to gpu
I will be removing the metal tray under the radiator as new one won't fit otherwise
its going front mounted for a reason, don't need to feed hot air from GPU into CPU. Cool air from outside way better. GPU can't tell the difference.
I really don't expect anyone here to have same combo but worth a try
Now I am curious if the 450mm tubing is long enough to get to the bottom of my case and fight its way past my 7900 XT. Cables from H100i (which are only 300mm) can easily reach top of the case but not sure about the bottom. I have more tubing to play with., 150mm (15cm, about length of a fan)
I found one photo of someone with a LF 420 installed in my case but they had a vertical mounted GPU and it was only a small gpu, so could route cables up behind GPU. Mine is 3..5 slot, thats not going to happen.
Current PC - https://au.pcpartpicker.com/list/FFMs89
Case Fractal Design Meshify S2 (case so old the page for it is just info now)
AIO - Arctic Liquid 2 Freezer 360mm AIO
GPU - Powercolor Red Devil RX 7900 XT 20gb OC (338mm long)
there is a gap between the end of GPU and Radiator... new radiator is thicker though. I might be able to run cable next to gpu
I will be removing the metal tray under the radiator as new one won't fit otherwise
its going front mounted for a reason, don't need to feed hot air from GPU into CPU. Cool air from outside way better. GPU can't tell the difference.
I really don't expect anyone here to have same combo but worth a try
Last edited:
Facebook
Twitter
Instagram