[SOLVED] Meta quest 2 vr, computer loses display signal at windows logo

[Kirinoo]

Heya really would appreciate more ideas here, as I've already spent 3 hours last night with no luck.

My pc specs are
Asus motherboard forgot full name
Rtx 3080
I7-8700k

I know for sure the computer components are quite okay, and that there's no power supply issue since it's worked fine for a year.
The issue started after I was setting up my Meta quest 2 vr last night.
Upon downloading and Virtual desktop and finally gettig it all set up. I launched Virtual desktop on my quest2, however i noticed after I tried launching beat Saber. That nothing was happening. Upon taking off my headset, i noticed the monitor has lost signal to my computer now.

From this point on, everytime I restart he computer. It gets to the manufactures logo, and then the windows logo where the circle spins. But instantly loses signal again once it finishes spinning

The other crazy thing is, even if I leave it on. My cox does not detect the pc on internet. However during my 3 hour troubleshooting, I realized at some point it had actually connected to the internet. I don't know if this is a correlation or not but just extra info that might be important.

Could really use some more advice

 

[Kirinoo]

I can try that USB idea, and it's connected to the pc via internet. It's using a application called oculous on my pc, and basically it links the two together. It could not be via internet but it's basically how I set it up according to the instructions

 

[rgd1101]

take the gpu out and test with the igpu?

 

[Kirinoo]

take the gpu out and test with the igpu?

What do you mean by igpu? I've never heard that before sorry.

 

[Kirinoo]

take the gpu out and test with the igpu?

Okay so I tested plugging in my vr via cable, and it still loses display from the monitor after the windows logo. But I can see my desktop login screen on my vr. But I can't interact with it in vr or even using my keyboard

 

[rgd1101]

igpu. the integrated gpu on cpu.

plug the monitor to the motherboard output.

doesn't it come with a controller?

 

[Kirinoo]

igpu. the integrated gpu on cpu.

plug the monitor to the motherboard output.

doesn't it come with a controller?

It does come with controllers, but I can't interact with my login screen on my desktop in the VR. I tried the unplugging the gpu from the motherboard and plugging the monitor HDMI to the motherboard, I didn't get a display at all. Not even the windows logo

 

[rgd1101]

unless you can get into safe mode and uninstall the app.
Try the usb repair thing.

 

[Kirinoo]

unless you can get into safe mode and uninstall the app.
Try the usb repair thing.

Just incase if I'm doing this whole windows safe mode incorrectly,can you tell me the steps on how to do it? I've been turning the pc off once I see the windows logo 3-4 times

 

[Kirinoo]

unless you can get into safe mode and uninstall the app.
Try the usb repair thing.

Also crazy idea, but if I take the SSD that the application is downloaded on, and put it in a different pc. To try to get a display normally and delete the software, is that possible?

 

[rgd1101]

Just incase if I'm doing this whole windows safe mode incorrectly,can you tell me the steps on how to do it? I've been turning the pc off once I see the windows logo 3-4 times

that should do it

Also crazy idea, but if I take the SSD that the application is downloaded on, and put it in a different pc. To try to get a display normally and delete the software, is that possible?

you could try. but it likely a driver

 

[Kirinoo]

that should do it


you could try. but it likely a driver

Would there be a issue if my SSD and their SSD both contains a OS?

 

[rgd1101]

where you able to get it working?