Missing back piece of my case.

mizab70

Distinguished
Apr 5, 2008
3
0
18,510
So I have a pretty odd problem. I had ordered my case about 2 years ago from cyberpower. Since then I have been using my same case and upgrading components on my own which has been great. I just upgraded my 2 video cards to just 1 though and I am missing the little pieces that should be there because only 1 video card in there now. I searched through everything that was sent to me from cyberpower and could not find extra pieces to put there. I have no clue what this part is called or where I could buy them at. My case is a Azza Hurrican 2000 Full Tower if that is important.

Any help would be greatly appreciated, hopefully I am not too confusing about what I am looking for it need be I could post a picture of what I am talking about.
 
Solution
For lack of a better term I would call it a "Rear slot filler plate". Other than aesthetics this plate also serves as an RF shield. There is no problem if there is a gap there because air exhausts at that location (rear of computer). If you like to cover it use a piece of electrical tape or try a similar part from another computer. Some are perforated, and some are not. Either one will work.
What you're looking for is an expansion slot cover. For a simple piece they can be a bit expensive. I'm not sure that Azza sells them individually for their cases, but you can buy a pack online if you need a replacement.
These will match the case nicely -http://www.moddiy.com/products/High-Quality-Vented-Black-Expansion-Slot-Cover.html-
 
For lack of a better term I would call it a "Rear slot filler plate". Other than aesthetics this plate also serves as an RF shield. There is no problem if there is a gap there because air exhausts at that location (rear of computer). If you like to cover it use a piece of electrical tape or try a similar part from another computer. Some are perforated, and some are not. Either one will work.
 
Solution