Question Missing SMD capacitors or resistors on a Quadro P6000

[gkdofaus]

I recently purchased a used Quadro P6000 which works perfectly.
I’ve noticed there are a few either resistors or capacitors missing around where the GPU chip is.
When I looked again at the original eBay advertisement I can see it also so the eBay seller didn’t rip me off or anything. I should have checked closer.
I’ve stressed tested it with some productivity and gaming benchmarks and all ok.
Do I need to worry as the card works flawlessly?
Please see picture.
View: https://imgur.com/a/GNSDamb

 

[Lutfij]

The saying goes, if it ain't broke, don't fix it. You've stated that it's been stress tested and there's no issue with the GPU. I've cross-referenced the image you've parsed with this;

NVIDIA Quadro P6000 Specs

NVIDIA GP102, 1645 MHz, 3840 Cores, 240 TMUs, 96 ROPs, 24576 MB GDDR5X, 1127 MHz, 384 bit

www.techpowerup.com

and from what I can tell, you've got the same exact back side of the GPU, near the GPU die. It looks the same, to mine.

 

[Viking2121]

If it works and passes all benchmarks without crashing, I wouldn't worry about it, I've had a Core 2 duo back then that was missing a few capacitors due to how I had it stored, it still worked fine, Of course put it threw its paces with any and every benchmark/stress test you can if its still in the return window just to make sure.