Question Missing standoff screws

[IgalAsim]

Hi, first I am new at building PC's .
I bought the spec 02 Corsair case.
And I have the TUF x-570 Mobo(ATX).
I have received only 1 standoff screw (which I didn't know where to put) with the case which I find weird.
It looks like the centered screw hole has sort of a built in standoff that lifts the mobo a bit. And in general it looks from the side as if the mobo is not touching the case.. this is the manual
https://www.corsair.com/ca/en/Categ...Red-LED-Mid-Tower-Gaming-Case/p/CC-9011051-WW
Thanks guys.

 

[rgd1101]

sure it not a backup? check the case, should be there already.

 

[rickypicky5]

I recently bought a Fractal Design Focus G case. Oddly enough, it came with what I first thought was a standoff screwed in the middle-most hole of the backplate. Upon further inspection this 'standoff' was not really a standoff because the top of it did not have a hole in it where the motherboard screw needs to go after the motherboard is laid on top of it. I removed it by with a tiny socket wrench, and proceeded to use the 'real standoffs' that were provided with my case.

Maybe that's what your Corsair case has? Look again for the real standoffs and if you don't find them I would contact Corsair.