[SOLVED] Mitsubishi Diamond Pro 2060u Factory Mode - FIXED

Sep 2, 2020
5
0
10
Hello, I have a 2060u monitor, I was attempting to enter factory mode by pressing the power button then OSD off and selecting 255 with minus button then 5 with plus button. I have selected 254 instead and I get the same menu as the user menu but with a yellow border as well as (MOD)(F-1)F-2 which I don't touch. Is there a way to exit back to the user OSD? Thanks
 
Solution
UPDATE - FIXED
Previously I found the MOD F1 F2 menu screen, just select MOD and then push the plus key until you get to 10 and push OSD OFF. I am now back to the user mode, few!
Sep 2, 2020
5
0
10
Some further details, instead of brightness contrast just being a 0-100 number I get 254 for contrast and 129 for brightness. Red Green Blue also was 0-100 but now is R -64 G-151 B-144. I tried to push power on with OSD off and when 0 appears select 255 then 5 but that no longer works as I am still stuck in the same menu. Glad I didn't enter "Brick Mode" at least
 
Sep 2, 2020
5
0
10
Google Mitsubishi 2060u Service manual PDF. It appears there is a service mode and a user mode for the OSD, I have entered some other OSD mode.

Google "gateway vx1120 or 2060u service manual" and you should get a exact search hit at the top, this is how I entered factory mode, 255 then 5, only I selected 254 then 5
 
Sep 2, 2020
5
0
10
UPDATE - FIXED
Previously I found the MOD F1 F2 menu screen, just select MOD and then push the plus key until you get to 10 and push OSD OFF. I am now back to the user mode, few!
 
Solution