Mixed up two 3 prong power cords

[cfs3corsair]

So I have a Benq XL 2411 monitor, and an MSI GT60 laptop. Both use a 3 prong power cord. Problem is... I think I mixed the cords up. I'm not sure which plugs into which device.

One has I-Sheng IS- 14 10A 125V 1250W printed on one side.

The other cable merely reads as KKS-10A.

The input/output on the adapter for e laptop reads 100-240V ~2.5A 50-60hz input, and 19.5V 9.2A output.

The monitor has a 100-240V ~50/60hz 1.5A rating.

Thanks!

 

[Flying Head]

Both devices use about the same current, so the gauge is probably the same. They will be interchangeable. No problem if swapped.

 

[dudio]

The monitor uses a straight wire from the wall.
The laptop uses the one with the transformer.

 

[cfs3corsair]

The monitor uses a straight wire from the wall.
The laptop uses the one with the transformer.

I realize that. Which 3 prong cord plugs into the transformer though? The two 3 prong cords look basically the same

Oh, I should mention the KKS-10A reads 250V

 

[cfs3corsair]

Both devices use about the same current, so the gauge is probably the same. They will be interchangeable. No problem if swapped.

You sure? I forgot to mention that the KkS-10A cord also reads 250V" as opposed to the other cord, which reads only 125V

 

[Flying Head]

The higher voltage rating means the conductor has greater insulation thickness. Nothing to worry about if you are using at 125VAC.

 

[dudio]

They both claim 10 amps draw capability. You can use either one.