Mixer/Sound interface problem

[Juho_1]

Ive got mixer that output is 2mono 6.35mm for left and right. My sound interface only has 1input so is it okay to use 2xMono 6.35-1xStereo 6.35 Y-adapter without losing sound quality? Thank you!
https://m.ebay.com/itm/DZ559-6-3mm-1-4-Y-Splitter-STEREO-Plug-male-to-2x6-35mm-female-Audio-Guita-/311472970915?_trkparms=aid%253D222007%2526algo%253DSIM.MBE%2526ao%253D2%2526asc%253D20150519202348%2526meid%253Db539ba67acf74e8782e07e7d7bdd2650%2526pid%253D100408%2526rk%253D5%2526rkt%253D18%2526sd%253D122289609800&_trksid=p2056116.c100408.m2460

 

[rhysiam]

Since you're using analogue gear, technically every length of cable and every adaptor you use will introduce a little extra noise. In analogue, technically, any transmission involves a loss of sound quality since there's no such thing as a "perfect" signal.

Having said that, unless you're aiming for top-tier recording studio quality, an adaptor or two isn't going to make any tangible difference whatsoever (assuming it's not sitting right next to a fluro light, or other "noisy" electrical equipment).

 

[Juho_1]

Since you're using analogue gear, technically every length of cable and every adaptor you use will introduce a little extra noise. In analogue, technically, any transmission involves a loss of sound quality since there's no such thing as a "perfect" signal.

Having said that, unless you're aiming for top-tier recording studio quality, an adaptor or two isn't going to make any tangible difference whatsoever (assuming it's not sitting right next to a fluro light, or other "noisy" electrical equipment).

Yeah i didnt mean that i need perfect sound without any white noise, but i just need clear enough sound. Just plugging my sound interface to computer (usb) with one 6.3cable between mixer and sound interface gives good sound to right side and only white noise to left side and that is why i need stereo to my sound interface.

 

[rhysiam]

Yeah i didnt mean that i need perfect sound without any white noise, but i just need clear enough sound. Just plugging my sound interface to computer (usb) with one 6.3cable between mixer and sound interface gives good sound to right side and only white noise to left side and that is why i need stereo to my sound interface.

You're all good then.