I KNOW that this can be frowned upon however im just trying to make maximum use out of the resources i have. i purchased 2x2GB Viper 1 and then got an amazon voucher so i decided to purchase 2x8GB of viper 3 ram on discount
Memory Modules:
A: Viper 1 1600Mhz XMP
7-7-7-20
1.9v (so high???)
2x2GB
https://lh5.googleusercontent.com/-A6e2V7M-nug/UrRhDh0FY2I/AAAAAAAAYG4/TXSY6s32HmY/w795-h588-no/IMG_20131220_005101.jpg
B: Viper 3 1600Mhz XMP
9-9-9-24
1.5v (thats more like it)
2x8GB
https://lh3.googleusercontent.com/-iAxAzLY20Qc/UrOWyVoDKXI/AAAAAAAAYFc/59dRnWcixNg/w795-h588-no/IMG_20131220_010008.jpg
i have an MSI Mobo z87 PC mate with OC etc.
I have tested the ram working one of each (so one of A & B together)
clocked at 1600 mhz 1.56v (i heard its not safe above 1.6 and i want to save my 1. expensive ram)
9-9-9-24
all advanced settings set for B (the viper 3 ram) used as settings for A
apart from advanced sync timings which are all auto...
THE PROBLEM
ram slots:
PASS
Ch1--:--Ch2
---------------
--A---:---B--
-------:-------
2 slots used single channel A & B, windows 8.1 boots (sometimes crashes but can tweak later)
FAIL:
Ch1--:--Ch2
---------------
--A---:---B--
--A---:---B--
4 slots used... same settings... 2xA & 2xB dual channel... mobo resets and fails to get passed bios logo.
i know people will say the gain will be not worth the trouble but i prefer more ram if its possible for my android builds which would be MUCH quicker (and when i use my ssd as swap)
Memory Modules:
A: Viper 1 1600Mhz XMP
7-7-7-20
1.9v (so high???)
2x2GB

https://lh5.googleusercontent.com/-A6e2V7M-nug/UrRhDh0FY2I/AAAAAAAAYG4/TXSY6s32HmY/w795-h588-no/IMG_20131220_005101.jpg
B: Viper 3 1600Mhz XMP
9-9-9-24
1.5v (thats more like it)
2x8GB

https://lh3.googleusercontent.com/-iAxAzLY20Qc/UrOWyVoDKXI/AAAAAAAAYFc/59dRnWcixNg/w795-h588-no/IMG_20131220_010008.jpg
i have an MSI Mobo z87 PC mate with OC etc.
I have tested the ram working one of each (so one of A & B together)
clocked at 1600 mhz 1.56v (i heard its not safe above 1.6 and i want to save my 1. expensive ram)
9-9-9-24
all advanced settings set for B (the viper 3 ram) used as settings for A
apart from advanced sync timings which are all auto...
THE PROBLEM
ram slots:
PASS
Ch1--:--Ch2
---------------
--A---:---B--
-------:-------
2 slots used single channel A & B, windows 8.1 boots (sometimes crashes but can tweak later)
FAIL:
Ch1--:--Ch2
---------------
--A---:---B--
--A---:---B--
4 slots used... same settings... 2xA & 2xB dual channel... mobo resets and fails to get passed bios logo.
i know people will say the gain will be not worth the trouble but i prefer more ram if its possible for my android builds which would be MUCH quicker (and when i use my ssd as swap)