Mobo Built-in Graphics problem

[Unclejunebug]

Hey!

As you can see my Asrock FM2A55m's built-in graphics card doesn't work anymore. This can be proved by doing these troubleshooting methods:

-I switched out the unit's VGA cable with a new one.
-Switched it's monitor.
-Used the monitor and VGA cable to another unit. All worked fine.
-The unit starts okay, it's the graphics that won't work.

I'm not sure how to fix this problem, 1 solution is to format the HDD. I already tried updating the graphics drivers via another unit but that didn't work either.

 

[smorizio]

if there a gpu in the pc most onboard video will turn off and the new gpu will be the main video output. if there no video card soetime if you set the ipgpu video ram to high it can cause an issue. try clearing the cmos by the jumper. make sure all power is turned off. and the pc is unplugged so the mb will drain and clear.

 

[Unclejunebug]

if there a gpu in the pc most onboard video will turn off and the new gpu will be the main video output. if there no video card soetime if you set the ipgpu video ram to high it can cause an issue. try clearing the cmos by the jumper. make sure all power is turned off. and the pc is unplugged so the mb will drain and clear.

That's my workaorund as of now, the PC is turned off for a few days, all cords and cables are disconnected inside and outside.
PSU is turned off, all parts such as RAM, HDD, CPU etc. are disassembled.

If this doesn't work out a 3rd party GPU is the only solution to fix it i guess