Mobo wont short on.

davste07

Prominent
Nov 14, 2017
4
0
510
Hey all.

So I'm a having a problem with a friends MOBO, it wont post/turn on. I have tried shorting the power switch pins but nothing. The mobo has its led lit, the psu is fine, the cmos battery is brand new. The only way I got the system to power was by shorting the green and black wires on the 24 pin connecter when it was connected to the mobo. However that isn't a soft power so it didn't post.

I'm guessing there has been a short on the mobo and something has died along the power switch area, but does any one know how to turn on a system other than shorting the pins?

Thanksss
 
Solution

Although i've never tried it and probably never will, reflowing a motherboard means to bake the board for a short period of time in the oven, or using a heat gun, to very gently heat broken or cracked soldering joints to it's melting point so it will "reflow" back together. If you Google "reflow repair" you will see many videos and articles about this method.

http://www.tomsguide.com/forum/56202-35-what-reflow-laptop-repair
https://www.youtube.com/results?search_query=reflow+repair

It may still be under warranty. These boards were released in 2014. Check the serial number on the motherboard.

All ASUS motherboard purchased after November 1st, 1999 will carry 3 year warranty services. ASUS product warranty is based on the serial number printed.
 


Annoyingly it was second hand... so in the UK they won't do anything! 🙁 I've tried everything, I think it is just dead! Unless anyone knows the circuitry and can help me find if it shorting somewhere.
 

Your quite certain the power switch on you case is properly connected to the system panel pins on your motherboard, or the wires from the power switch are not damaged?

If you were really brave you could try the re-flow method to fix it.
 

Although i've never tried it and probably never will, reflowing a motherboard means to bake the board for a short period of time in the oven, or using a heat gun, to very gently heat broken or cracked soldering joints to it's melting point so it will "reflow" back together. If you Google "reflow repair" you will see many videos and articles about this method.

http://www.tomsguide.com/forum/56202-35-what-reflow-laptop-repair
https://www.youtube.com/results?search_query=reflow+repair
 
Solution