[SOLVED] Monitor goes to "no signal" after switching graphics card

[darrencoc]

I have gtx 1070 & 1050. lately I use gtx 1070, then I'm curious to try again using my gtx 1050. after i installed gtx 1050, my pc didn't enter bios and it displays "no signal". then I tried to replace it again with 1070, after 1070 installed the monitor did not enter the bios and the monitor still displays "no signal". I don't use onboard GPU because I use i5 9400f.

Edit:
For info: i have the latest driver for gtx 1070 installed already.

Please help me fix it. Thank you

 

[popatim]

Make sure your bios is set to initialize the PEG or PCIE Graphics first instead of the integrated (that you don't have)

 

[QwerkyPengwen]

Do a CMOS reset. Refer to your motherboard manual for any specific and proper method for your board.

 

[QwerkyPengwen]

Make sure your bios is set to initialize the PEG or PCIE Graphics first instead of the integrated (that you don't have)

The 9400f doesn't have onboard video, and with no video output from GPU, they can't do that.

 

[darrencoc]

Do a CMOS reset. Refer to your motherboard manual for any specific and proper method for your board.

I already did the CMOS reset and it's still happening.

 

[darrencoc]

Do a CMOS reset. Refer to your motherboard manual for any specific and proper method for your board.

Edit: OMG all this time i do the CMOS reset wrong and now it works!!!! thank you VERY MUCH!!! You just save my life XD