Monitor No Signal After Windows Logo Appears Windows 10

[francisagrava]

When I try to start up my computer the screen goes blank right after the windows logo appears the monitor says no signal. i can run my computer in safe mode im using display port to hdmi i also updated the drivers of quadro

PC SPECS
Windows 10
Intel core i7-8700K
16 GB Ram
MSI Z370 PC Pro
Quadro p4000
Seasonic 750FX
Viewsonic 32" vx3276

 

[terry4536]

Check the Display Adapter in the Device manager. I am guessing that the graphics card is either not recognized by Windows or the graphics driver is corrupted or missing.

Windows 10 updates have been updating the device drivers with crap drivers for some time. You can also check the events menu for the graphics driver to find out.

 

[terry4536]

If the graphics card is not being recognized first try reseating the graphics card and make sure that the PCIE power cables are secure in the graphics card.

Next try updating the graphics driver. It may be necessary to update the motherboard BIOS. A repair installation or fresh install of the operating system may be necessary.

Also you can force the graphics to integrated graphics in the BIOS. So you can use the motherboard video outputs during this process with the graphics card in place.

Download and install the graphics driver directly from geoforce.com. Don't use the Windows drivers.

 

[terry4536]

Also if the graphics card is listed in the Device Manager along with the generic graphics adapter, that is an indication that the graphics card isn't fully recognized.

 

[francisagrava]

Hello i already used all the drivers from geforce website but it still showing no signal

 

[francisagrava]

Also if the graphics card is listed in the Device Manager along with the generic graphics adapter, that is an indication that the graphics card isn't fully recognized.

the graphic card is listed in device manager i also try to disable integrated graphics of intel but still no luck 🙁

 

[ElectrO_90]

I would boot up using the iGPU and make sure it is all working with that.
Then move onto solving if it is the GPU.

 

[terry4536]

I would boot up using the iGPU and make sure it is all working with that.
Then move onto solving if it is the GPU.

To do that simply remove the graphics card. In the BIOS, the default setting of the graphics source is Auto. That means the system will switch from integrated graphics to the graphics card if it detects a graphics card in the PCI Express x 16 slot.

Otherwise you need to change the BIOS setting.

 

[terry4536]

Also if the graphics card is listed in the Device Manager along with the generic graphics adapter, that is an indication that the graphics card isn't fully recognized.

the graphic card is listed in device manager i also try to disable integrated graphics of intel but still no luck 🙁

In the BIOS, you can change the graphics source. The default is Auto. But you can also force the system to integrated or PCI Express x16 (graphics card).

 

[terry4536]

Also if the graphics card isn't fully recognized, the graphics driver update will not be successful. For example, if the generic graphics adapter is also listed.

 

[francisagrava]

Also if the graphics card is listed in the Device Manager along with the generic graphics adapter, that is an indication that the graphics card isn't fully recognized.

the graphic card is listed in device manager i also try to disable integrated graphics of intel but still no luck 🙁

In the BIOS, you can change the graphics source. The default is Auto. But you can also force the system to integrated or PCI Express x16 (graphics card).

i already change the graphic source in the bios

 

[terry4536]

Also if the graphics card is listed in the Device Manager along with the generic graphics adapter, that is an indication that the graphics card isn't fully recognized.

the graphic card is listed in device manager i also try to disable integrated graphics of intel but still no luck 🙁

In the BIOS, you can change the graphics source. The default is Auto. But you can also force the system to integrated or PCI Express x16 (graphics card).

i already change the graphic source in the bios

i also try to disable integrated graphics of intel but still no luck 🙁

I'm just responding to your post. Anything else I can help you with?

 

[terry4536]

If you still have the monitor problem when Windows loads, I would recommend a repair installation or a fresh install of the operating system.