Last night I noticed my computer seemed a bit slow, I decided to head over to https://www.userbenchmark.com/Software to test my PC parts. I noticed my ram was underperforming so I opened my PC up to change the slots the ram were in. In order from left to right, the ram was in slot 1,2 I moved it to 2,4. Ever since I have not been able to get a display on my monitor. I have tried everything from reseating the ram to resetting the CMOS battery to no avail. I would appreciate any insight into this problem. I'm not sure what to do. I have also noticed that other people with my same ram have had the issue. Keep in mind I did not have this issue until I reseated the ram.
The ram: https://www.amazon.com/G-Skill-Ripjaws-288-Pin-Desktop-F4-2400C15D-16GVR/dp/B013J7T5K6
same issue same ram: https://forums.tomshardware.com/thr...iving-signal-when-installing-new-ram.1563308/
previous post of mine: View: https://www.reddit.com/r/buildapc/comments/g0o86p/monitor_shows_no_display_help/
I would appreciate any help with this, I'm unsure if I should buy a new motherboard, new ram, or there is a fix to this problem I haven't found yet.
The ram: https://www.amazon.com/G-Skill-Ripjaws-288-Pin-Desktop-F4-2400C15D-16GVR/dp/B013J7T5K6
same issue same ram: https://forums.tomshardware.com/thr...iving-signal-when-installing-new-ram.1563308/
previous post of mine: View: https://www.reddit.com/r/buildapc/comments/g0o86p/monitor_shows_no_display_help/
I would appreciate any help with this, I'm unsure if I should buy a new motherboard, new ram, or there is a fix to this problem I haven't found yet.
Facebook
Twitter
Instagram