More bandwidth for 2 pc-s.

[Pathway_al]

Hy , I have an Tp-Link router (specs down on page).
I want to increase the bandwidth for two laptops connected on wireless 2.4Ghz, but I don't understand how to do that.
Also I don't want to sacrifice very much the other users that uses the network , I mean it's ok for me to use a little bit more network for myself
So , The bandwidth applyes only on ip only when i'm connected ?


AC750 Wireless Dual Band Gigabit Router
Model No. Archer C2

 

[kanewolf]

If you want more bandwidth for those two laptops get 5Ghz network adapters and move off the 2.4Ghz band. You have a dual band router, use it.

 

[Pathway_al]

0

If you want more bandwidth for those two laptops get 5Ghz network adapters and move off the 2.4Ghz band. You have a dual band router, use it.

Hy , I don't want to invest more in this network by buying some adapters, is there a easyer way to do that ( by routing settings ? )

 

[Pooneil]

Your router should be sufficient to share the ISP bandwidth between several computers. If the two computers are getting slow internet service, then you need to get a faster connection to your ISP. The router by default should be operating at its maximum settings and there is nothing more the router can do to help.

However slow service may be caused by interference from a neighbor's wifi or an improperly setup router that can be addressed.

 

[kanewolf]

You may be able to set QOS, but usually the results are not as hoped. Either use a wired connection, 5Ghz or share the 2.4Ghz with the rest.