[SOLVED] Mortar Max + CM H500 ARGB

[dolendojsn!]

I wanted to connect the ARGB fan of the CM H500 but it has 3 pin male (Actually it has 4 holes but the 2nd one is closed.) My mortar max has 4 female pin for ARGB.

What should I buy or do to sync it with the mobo? Thanks!

 

[CountMike]

I wanted to connect the ARGB fan of the CM H500 but it has 3 pin male (Actually it has 4 holes but the 2nd one is closed.) My mortar max has 4 female pin for ARGB.

What should I buy or do to sync it with the mobo? Thanks!

Mortar Max name is on several MSI MBs, which exact one ? This one for instance https://www.msi.com/Motherboard/B450M-MORTAR-MAX/Specification doesn't have ARGB header.

 

[dolendojsn!]

I think that's the one??? But I have this JRGB female pin in my mobo. JRGB/JRAINBOW = ARGB

 

[CountMike]

I think that's the one??? But I have this JRGB female pin in my mobo. JRGB/JRAINBOW = ARGB

If you are sure that's MB, all I see is "2 x 5050 RGB LED strip 12V connectors",
JRGB1 and 2
ARGB would be 5v. and have only 3 pins, never heard of a female ARGB header.

 

[dolendojsn!]

If you are sure that's MB, all I see is "2 x 5050 RGB LED strip 12V connectors",
JRGB1 and 2
ARGB would be 5v. and have only 3 pins, never heard of a female ARGB header.

Sorry, I messed up my terms. It was male instead of female argb header.

((I cant upload it as an image))

Anyway, this is what I'm talking about in my MB.
https://pasteboard.co/JfgSrj4.jpg


This one is the fan's pin but right now it is connected in my controller.

https://pasteboard.co/JfgSHIp.jpg

 

[CountMike]

Sorry, I messed up my terms. It was male instead of female argb header.

((I cant upload it as an image))

Anyway, this is what I'm talking about in my MB.
https://pasteboard.co/JfgSrj4.jpg


This one is the fan's pin but right now it is connected in my controller.

https://pasteboard.co/JfgSHIp.jpg

JRGB1 and 2 are RGB headers and JFP2 is front panel connector for buzzer/system speaker.
Your second picture clearly shows an ARGB (digital 5v) connector for lights on a fan or controller. So clearly you don't have anywhere on MB to connect to.

 

[dolendojsn!]

JRGB1 and 2 are RGB headers and JFP2 is front panel connector for buzzer/system speaker.
Your second picture clearly shows an ARGB (digital 5v) connector for lights on a fan or controller. So clearly you don't have anywhere on MB to connect to.

Okay, thanks a lot! So it means that i have to buy some third party device that like the argb led small controller of Coolermaster. Damn.

 

[CountMike]

Okay, thanks a lot! So it means that i have to buy some third party device that like the argb led small controller of Coolermaster. Damn.

Yes, that's only way.