MOTHERBOARD + Case usb help

franches

Distinguished
Nov 11, 2014
229
3
18,715
Oh hi there, thank you for stumbling across my humble thread,
I Have this simple Question : I recently bought an h61m dg3/usb 3.0 but Im worried it has no pins to where I could connect the case's usb 3.0 port mobo has 2 usb 3.0 4 usb 2.0 case has 1 2.0 1 3.0
Im pretty worried as I already HAVE these products. Would it work if I would connect case USB 3.0 onto mobo 2.0 would it just work as a 2.0?
 
Solution


This is incorrect

The usb 2.0 header is an 8 pin connection. The USB 3.0 connection is 19 pin. You can not just plug a usb 3.0 header cable from your case into a usb 2.0 header on your motherboard.

Your Asrock board has a usb 3.0 front header on it, so you are fine.


This is incorrect

The usb 2.0 header is an 8 pin connection. The USB 3.0 connection is 19 pin. You can not just plug a usb 3.0 header cable from your case into a usb 2.0 header on your motherboard.

Your Asrock board has a usb 3.0 front header on it, so you are fine.
 
Solution



I'm sorry if this is a Stupid quesiton, but I cannot find the header since its not colored in blue and I even looked in the manual
 



I'm sorry if this is a Stupid quesiton, but I cannot find the header since its not colored in blue and I even looked in the manual
 


I'm sorry if this is the wrong forum but I looked at the supported list for ram and my ram didn't appear, I made sure the speed and the dimm and the max ram where all compatible and also looked in other threads who said 99% of the time all ram is ok I'm going to hope it is be use otherwise those where 71€ I will not get back :S