So recently i had a problem with my pc I don’t know how this happened but all I remember is that I unplugged the gpu so i can switch the sata ports from 5 and 6 to 1 and 2 ,
After I done that I tried to run my pc and when i turn it on the ez debug cpu turns on and there is no display on the screen also the usb ports doesn’t work at all and the power led doesn’t light even that I’m sure that they front panel is plugged correctly, otherwise everything is ok with the system the ram and the gpu is working i even tried them on my friends pc and they worked i also tried to use another gpu on my pc but nothing happened and i tried to turn it on with the display port on the motherboard and nothing happened,another thing i did is using one ram stick but also nothing happened and finally i reseated the cpu and before that I searched for any bent pins and i everything was fine.
Motherboard : msi z370 gaming plus
Gpu : msi gtx 1070 ti
Cpu : intel i5 8600k
Ram : g.skillz trident 16g 3200
Power switch: rosewill hive 650w
Case : nzxt h500
After I done that I tried to run my pc and when i turn it on the ez debug cpu turns on and there is no display on the screen also the usb ports doesn’t work at all and the power led doesn’t light even that I’m sure that they front panel is plugged correctly, otherwise everything is ok with the system the ram and the gpu is working i even tried them on my friends pc and they worked i also tried to use another gpu on my pc but nothing happened and i tried to turn it on with the display port on the motherboard and nothing happened,another thing i did is using one ram stick but also nothing happened and finally i reseated the cpu and before that I searched for any bent pins and i everything was fine.
Motherboard : msi z370 gaming plus
Gpu : msi gtx 1070 ti
Cpu : intel i5 8600k
Ram : g.skillz trident 16g 3200
Power switch: rosewill hive 650w
Case : nzxt h500