Motherboard no display and booting again and again

[jasien138]

Hi guys
I just bought the asrock q1900m pro3 motherboard which has a patent soldered intek celeron j1900 processor.
Note : the max ram that it can handle is 1333mhz ddr3.
When i brought it at home i used an (not so old) psu 600 watt x-tech
And an used 2x4 gb ddr3 ram i dont know what its speed is so.....
When i pluged everything in i noticed that it doesnt have a cpu power connector only a 24 pin psu connector the motherboard with the cpu itslef is a fanless design which means it doesnt have a fan on the cpu.
So for satus of the system i have to look at the psu fan.
But no display and also the fan of the psu keeps rebooting so i dont know.
I want to do everything possible becouse it costed me more then 900 SRD
Tnx.

 

[smurfy593]

Check the brand/code on your ram and find out how many Mhz is if not listed.About the psu i really don't know what to say maybe u need to change it.Check watt about all your hardware etc.

 

[jasien138]

Tnx i'll try

 

[jasien138]

Hey i looked it up and yes my ram is 1600mhz so.... i have to buy a 1333mhz ram thanks btw

 

[jasien138]

I will see if that is the problem

 

[jasien138]

Is it realy possible that only becouse the ram is not the req speed the sytem wil be rebooting again and again?

 

[smurfy593]

Is it realy possible that only becouse the ram is not the req speed the sytem wil be rebooting again and again?

If its not supported maybe yes or can't boot at all.Is everything else working fine?Have u tested the rest of your hardware in different enviroment/pc?

 

[jasien138]

Yes all the hardwares are perfect but i dont know really sure about the psu

 

[smurfy593]

Yes all the hardwares are perfect but i dont know really sure about the psu

Ok,it would be good if u tested the psu maybe on some other old/light hardware to see if it works fine.Check it out.