Hi, I got a Supermicro X7DBE motherboard equipped with 2 x CPUs.
My problem is, that when I install my cpu into CPU2 & CPU1 "slot", the pc isn't givinging any video signals, the green mobo led that indicates that the motherboard is OFF.
If I ONLY USE CPU2 slot WITHOUT the CPU1 , the pc starts, green led on mobo is ON, pc boots up.
I've also noticed, that in the CPU1 slot, a pin is a bit higher than the others. I don't think its bent, you can only feel it via finger, it can't be seen with eyes.
What can I do to make it running?
When I got the mobo, it started always, and It had an overheating problem. In the CPU1 slot, the heatsink was bad, and I didn't notice it. It was running 80C°, after a time the pc wasn't turning on like now. I turned it on&off like 50times, sometimes it started up, sometimes it wasn't. So I got that cpu out, for some reason the cpu was a xeon 5420, but the mobo started with saying 2x intel xeon 5450, how is this possible?, I bought 2 new ones(same xeon 5450) and it didn't turn on. Only turns on with 1x cpu in CPU2 slot
RAM: 32GB DDR2
CPU: 2X Intel Xeon 5450 (4core, 3GHz)
My problem is, that when I install my cpu into CPU2 & CPU1 "slot", the pc isn't givinging any video signals, the green mobo led that indicates that the motherboard is OFF.
If I ONLY USE CPU2 slot WITHOUT the CPU1 , the pc starts, green led on mobo is ON, pc boots up.
I've also noticed, that in the CPU1 slot, a pin is a bit higher than the others. I don't think its bent, you can only feel it via finger, it can't be seen with eyes.
What can I do to make it running?
When I got the mobo, it started always, and It had an overheating problem. In the CPU1 slot, the heatsink was bad, and I didn't notice it. It was running 80C°, after a time the pc wasn't turning on like now. I turned it on&off like 50times, sometimes it started up, sometimes it wasn't. So I got that cpu out, for some reason the cpu was a xeon 5420, but the mobo started with saying 2x intel xeon 5450, how is this possible?, I bought 2 new ones(same xeon 5450) and it didn't turn on. Only turns on with 1x cpu in CPU2 slot
RAM: 32GB DDR2
CPU: 2X Intel Xeon 5450 (4core, 3GHz)