Question motherboard RAM slots not working?

[joshlad044]

hey, i’m currently building my first pc and have come across an issue where when i insert a RAM stick into slot 1 on my motherboard the pc won’t boot properly. instead it turns on for 10 seconds then turns off - this repeats.
I have 2x4 corsair vengeance ddr4 2133mhz RAM and use a GIGABYTE GA-H110-D3A

I am able to power my pc on 4GB of RAM in slot 2 (motherboard only has 2 slots)
I am new to this and would really appreciate some help/advice

Thanks in advance
Josh

 

[GmodX2345]

Hi . I have a question for you . What is your processor model ? Because this can be the main problem . If not then it can be one of your memory that is defective .

 

[joshlad044]

Hi . I have a question for you . What is your processor model ? Because this can be the main problem . If not then it can be one of your memory that is defective .

intel i3 6100

 

[GmodX2345]

Ok . Try to put the RAM stick from slot 2 to slot 1 and see if it's happens to turn on and off again .

 

[sizzling]

Check the motherboard for bent cpu pins.

 

[joshlad044]

Ok . Try to put the RAM stick from slot 2 to slot 1 and see if it's happens to turn on and off again .

yes it turns on and off again - both sticks work in slot 2 but nothing works in one. Could the slot be disabled in bios??

 

[GmodX2345]

yes it turns on and off again - both sticks work in slot 2 but nothing works in one. Could the slot be disabled in bios??

I can say yes . Try to enter to bios and verify if it's an option related to the slot . If it's then try to enable it . Also check the motherboard for bent cpu pins just like sizzling said .

 

[joshlad044]

I can say yes . Try to enter to bios and verify if it's an option related to the slot . If it's then try to enable it . Also check the motherboard for bent cpu pins just like sizzling said .

ok thanks i’ll let you know early tomorrow

 

[jhNs]

ok thanks i’ll let you know early tomorrow

did it worked? Got the same problem with my GA-H110-D3A

 

[SkyNetRising]

did it worked? Got the same problem with my GA-H110-D3A

Start your own topic.
And check cpu socket for bent pins.