[SOLVED] Motherboard stuck on VGA led on ez debug

[iMetoo]

Hi, my build is:

• Motherboard: MSI B560M PRO VD
• CPU: intel core i9 10900F
• RAM: OLOY 3600 MHz ddr4 (2 x 8 gb)
  I finished building it some hours ago, I booted it up, there were some white lights on the board, the fans were spinning, but nothing showed up on the screen, then I noticed that on the ez debug section of the motherboard, there was white light stuck on VGA.
  

I have no display, so I can't access BIOS.
I need to know is the problem from the MB or from CPU , i bought both from Amazon so I need to decide which one I should return.

 

[Darkbreeze]

Do you have a graphics card installed? Because that CPU and ALL "F" model Intel CPUs, do not have integrated graphics.

Without a graphics card installed, you will never have any display output.

 

[iMetoo]

Do you have a graphics card installed? Because that CPU and ALL "F" model Intel CPUs, do not have integrated graphics.

No I don’t , but there is HDMI PORT

 

[iMetoo]

No I don’t , but there is HDMI PORT

I got your point, I’ll try to instal graphics card

 

[Darkbreeze]

Yes, there are graphics outputs on the motherboard but they ONLY work if you have a CPU model that has integrated graphics. Yours does not. If you had a model WITHOUT an "F" on the end, then it would work. With an F model, it can't, because it does not have it and it must have it in order for the video outputs on the motherboard to function.

https://www.pcworld.com/article/333...-gpu-and-probably-arent-worth-your-money.html

 

[iMetoo]

Yes, there are graphics outputs on the motherboard but they ONLY work if you have a CPU model that has integrated graphics. Yours does not. If you had a model WITHOUT an "F" on the end, then it would work. With an F model, it can't, because it does not have it and it must have it in order for the video outputs on the motherboard to function.

https://www.pcworld.com/article/333...-gpu-and-probably-arent-worth-your-money.html

Big thanks for your help,

 

[Darkbreeze]

Anytime.