Motherboard touching/almost touching PSU? Should I be worried?

[liamishmael]

I really don't want to buy a new case, but if I have to, I will...

http://tinypic.com/r/2zokiup/9

It's barely/almost touching the PSU. I've read a couple posts saying that it should be fine, but I'm not sure. I need a recent opinion.

 

[alexoiu]

No issue at all.

 

[halo2ofdeath]

your fine, being the edge of the mobo is the suggested place to hold it by, it is typically non conductive and not actually connected to any tracers or such on the mobo itself ( as the tracers of kinda sandwiched in-between 2+ pieces of (mostly) fiberglass. so even if you were to take a metal rod and touch the edges of your mobo (while its running) with it nothing would (typically) happen (note: not suggesting to do so, just making a statement)

 

[liamishmael]

your fine, being the edge of the mobo is the suggested place to hold it by, it is typically non conductive and not actually connected to any tracers or such on the mobo itself ( as the tracers of kinda sandwiched in-between 2+ pieces of (mostly) fiberglass. so even if you were to take a metal rod and touch the edges of your mobo (while its running) with it nothing would (typically) happen (note: not suggesting to do so, just making a statement)

Thanks for the reassurance!