Motherboard won't Boot

[Rolex134]

So I just got done putting my computer together....and...no display:
AsRock 970 Extreme has a Dr. Debug code of 0x08(08) which is:
"North Bridge initialization after microcode loading"
No splash screen at all for boot.

 

[ryan27968]

this is probably a doa mobo. asrock boards are pretty unreliable.

 

[alexoiu]

What CPU using?

 

[Rolex134]

What CPU using?

AMD FX-8350 Vishera

 

[alexoiu]

The CPU mght require a BIOS update. There should be a sticker on the board's BIOS chip. Check the BIOS version.
What Extreme board (3,4, ...)?

 

[Rolex134]

The CPU mght require a BIOS update. There should be a sticker on the board's BIOS chip. Check the BIOS version.
What Extreme board (3,4, ...)?

4

 

[Rolex134]

The CPU mght require a BIOS update. There should be a sticker on the board's BIOS chip. Check the BIOS version.
What Extreme board (3,4, ...)?

4

 

[alexoiu]

The CPU requires P2.10. There's a sticker on the BIOS chip. Check the board's BIOS version.

 

[Rolex134]

The CPU requires P2.10. There's a sticker on the BIOS chip. Check the board's BIOS version.

Alright , so I assembled the computer outside of the case, I forgot to add spacers in the motherboard by mistake.

Anyway, I have a new error code:
05

Has one stick of RAM in it and the video card. Also I think the BIOS version is P.30 so it supports it.

 

[alexoiu]

If leaving only CPU, CPU fan, both 24 and 8 pin power cables connected and starting the board what's the error code? Still 05?

 

[Rolex134]

If leaving only CPU, CPU fan, both 24 and 8 pin power cables connected and starting the board what's the error code? Still 05?

CPU cooler is aftermarket, but yes all plugged in.

 

[alexoiu]

My question was about the error code when starting the board with only CPU and CPU fan installed.

 

[Rolex134]

My question was about the error code when starting the board with only CPU and CPU fan installed.

19, which just means it's trying to find the RAM and there is none.

 

[alexoiu]

Now add single RAM stick and test again.

 

[Rolex134]

Now add single RAM stick and test again.

Error code 05

 

[alexoiu]

What's the memory model?

 

[Rolex134]

What's the memory model?

GSkill Ripjaws X-Series: 4GBx2, 1600MHZ @ 1.50V's - DDR3 of course.

 

[alexoiu]

It might be a motherboard issue. Can you RMA it?

 

[Rolex134]

It might be a motherboard issue. Can you RMA it?

I'm im in doubt it's a motherboard issue, since the codes I'm getting mean the motherboard and processor are working together(code 19) without any RAM or video card, and code 15(no RAM) with video card.

 

[alexoiu]

Then RMA the memory or try different module/kit.
I'm still not sure if the BIOS does support the CPU.

 

[Rolex134]

Then RMA the memory or try different module/kit.
I'm still not sure if the BIOS does support the CPU.

Motherboard saids it does, P2.30, and it requires what to run?