I have been attempting to get a recased (and remotherboarded) build up and running for almost 14 hours straight. The only parts that were changed from the previously fully functional build were RAM, Motherboard, and CPU cooler. I have done the entire stickyed list. Because I have 2 motherboards, as well as 2 ram kits, I was able to breadboard it in 2 separate mobos. When turning on, each motherboard shows diagnostic lights, lighting up for each part as the turn on continues. When removing components, it properly identifies that each component is removed. However, when all components are installed, the lights go off, showing that all parts are working and installed. It still does not post. When returning to the original configuration of the PC I was disassembling, it still fails to post, and does the exact same error combo. Any ideas for what could have happened? Can post pics if needed.
Motherboards:
X570 steel legend
B350F
CPU:
Ryzen 5 3600x
RAM:
4x 8gb trident z neo @3600
2x 8gb balistixx sport @2400
GPU:
MSI RTX 2070 Super Gaming X trio
Drives:
1TB NVME SSD
250 GB SSD
2TB SSHD
Power supply:
Power spec 650 W Gold
CPU coolers:
Gammax GT
Kraken X52
Cases:
o11 dynamic
Corsair 460x
Motherboards:
X570 steel legend
B350F
CPU:
Ryzen 5 3600x
RAM:
4x 8gb trident z neo @3600
2x 8gb balistixx sport @2400
GPU:
MSI RTX 2070 Super Gaming X trio
Drives:
1TB NVME SSD
250 GB SSD
2TB SSHD
Power supply:
Power spec 650 W Gold
CPU coolers:
Gammax GT
Kraken X52
Cases:
o11 dynamic
Corsair 460x
Last edited: