Question Mounting radiator fans

[Rhescape]

To mount fans to the radiator, I know that you use the included long screws to install the fan onto the radiator then, use the small screws that come with the radiator to mount it to the PC through the holes on the opposite side of where you installed the fans. This is for when you want to mount the radiator touching the case.

My question is, what if you wanted to install the fan side of the AIO onto the case with the radiator sticking into the case. The NZXT h510 only has space at the front of the case for a 240mm radiator so this is the configuration I would like to setup. Would you do the same thing where you take the long screws and install the fans by screwing from the radiator side into the fans and then just use the radiator mounting screws to instead mount the fans to the case? (The AIO cooler in question is the Corsair H100i PRO)

 

[bmockeg]

The radiator can go up against the case with the fans behind in a pull configuration.

 

[Rhescape]

The radiator can go up against the case with the fans behind in a pull configuration.

Yea, im aware, but I want the radiator in the case for aesthetics. This doesn't answer my question

 

[bmockeg]

Yea, im aware, but I want the radiator in the case for aesthetics. This doesn't answer my question

You use the same long fan screws. Through the case then the fan into the radiator