Mounting SSD in case

KublaiKhan

Distinguished
May 24, 2015
361
3
18,815
The adapters I've seen allow a 2.5 inch SSD to mount in a 3.5 inch enclosure. But I don't have any 3.5 inch trays in my case. They are all 5.25 inches.

We will have two 2.5 inch SSDs to install. Can someone recommend a converter/adapter to place those into a single 5.25 inch tray? Steel would be better than aluminum.
 
Solution


stack away my friend stack away. they do create heat but most of the ssd case is empty space. they require no venting like hard drives.

R_1

Expert
Ambassador
this will draw ire from some people, but here goes.
double sided tape. an ssd weighs nothing screws are overkill on an ssd unless your case is in a paint mixer or similar situation. 3M double sided tape will hold her still wherever you want her. failing that hot glue. both are easliy removed and cause no damage to anything. I have a couple ssd taped to the bottom of my case right now, and for the last 8 mo's.
 

USAFRet

Titan
Moderator


No ire here. I've had an SSD velcroed to the case for ages.