hi
have used this forum a few times to confirm my pc builds with great success so i thought i would chance a little more help on this issue.
///in short/// i want to buy a 20m long patch cable and replace the 0.5m one//////////
i have a router that i wish to move from upstairs to the downstairs separate apartment. the purpose for this IS to move the router, no other reason, i am currently wired downstairs via Ethernet and all is fine.
i am not at all clued up on fibre networks so please forgive any nonsense i say
i believe the router is connected directly to the fibre cable
the cable has printed on it "optic fibre cable 3.0 SM G652D-9 125 LSZH", is yellow with a green connector which i think is a sc/apc
the other end has the same connection and is connected to a white box which has very thin yellow cable leading out of the property
my possibly too easy solution is to get a cable of the same type only longer say 20m and run it downstairs via the inner ducting in the house(all prepared)
The ducting has no power in it and will eventually have a "normal" telephone cable for the EU, a coax for TV and possibly a Ethernet cable
my understanding is that i require a fibre patch cable single mode with a sc to sc connection of type apc. Please inform me if i'm wrong
so my questions are
Can i just buy a longer cable? is it that easy?
if yes then is this cable ok?
https://www.fs.com/products/41656.html
is that company ok?
this wire say's it is 2.0mm and as it is in stock in the EU warehouse, i would receive it quicker is this one ok ?
https://www.fs.com/products/41923.html
there is lots of information about these cables that i simply don't understand so i am concerned if i am choosing correctly
Any and all advice is appreciated
I can get any info you require (hopefully) and can get pictures if wanted
i obviously want the internet to be as good as it is now so please correct anything you see as a problem.
I do not need to buy from the link provided but it is the cheapest i found
i am in the EU , Spain
have used this forum a few times to confirm my pc builds with great success so i thought i would chance a little more help on this issue.
///in short/// i want to buy a 20m long patch cable and replace the 0.5m one//////////
i have a router that i wish to move from upstairs to the downstairs separate apartment. the purpose for this IS to move the router, no other reason, i am currently wired downstairs via Ethernet and all is fine.
i am not at all clued up on fibre networks so please forgive any nonsense i say
i believe the router is connected directly to the fibre cable
the cable has printed on it "optic fibre cable 3.0 SM G652D-9 125 LSZH", is yellow with a green connector which i think is a sc/apc
the other end has the same connection and is connected to a white box which has very thin yellow cable leading out of the property
my possibly too easy solution is to get a cable of the same type only longer say 20m and run it downstairs via the inner ducting in the house(all prepared)
The ducting has no power in it and will eventually have a "normal" telephone cable for the EU, a coax for TV and possibly a Ethernet cable
my understanding is that i require a fibre patch cable single mode with a sc to sc connection of type apc. Please inform me if i'm wrong
so my questions are
Can i just buy a longer cable? is it that easy?
if yes then is this cable ok?
https://www.fs.com/products/41656.html
is that company ok?
this wire say's it is 2.0mm and as it is in stock in the EU warehouse, i would receive it quicker is this one ok ?
https://www.fs.com/products/41923.html
there is lots of information about these cables that i simply don't understand so i am concerned if i am choosing correctly
Any and all advice is appreciated
I can get any info you require (hopefully) and can get pictures if wanted
i obviously want the internet to be as good as it is now so please correct anything you see as a problem.
I do not need to buy from the link provided but it is the cheapest i found
i am in the EU , Spain