Question MPG Z590 + TP-Link AX3000

[raphaeldutra]

Hello everyone,

I'm experiencing a frustrating issue with my MPG Z590 motherboard that I'm hoping someone here might be able to help me troubleshoot. Until recently, my system was running smoothly with no issues. However, after I installed a TP-Link WiFi 6 AX3000 PCIe WiFi Card into the PCI_E4 slot, my PC no longer boots properly.

Here are the specifics of the problem:

Upon powering on, the system freezes at the MPG logo screen. I can press F11 to access the boot menu and attempt to select Windows to boot, but this doesn't resolve the issue.
I am able to enter the BIOS settings, and everything appears normal there, but the system still fails to boot into the operating system.
I've already tried removing the TP-Link PCIe card to see if that would allow the system to boot again, but the issue persists.
Did I installed the PCI-E in the wrong slot? I used the PCI_E4 slot.

Here is a scheme of my mother board and the slot that I used:

 

[rgd1101]

I can press F11 to access the boot menu and attempt to select Windows to boot, but this doesn't resolve the issue.

as in what? stuck in something?

full system spec?

 

[raphaeldutra]

as in what? stuck in something?

full system spec?

hello RGD1101,

yes, it clears the screen to a black back ground and a single _ in the top left.
I can see that he is trying to do something because the lights don´t stop flickering. But it stays for hours without going anywhere.

I´m running:
MPG Z590 Gaming Force
Intel® Core™ i5-11600K
OLOy DDR4 RAM 32GB (2x16GB) 3600 MHz CL18
EVGA GeForce GTX 1060 SC
XFX XTR² 550

 

[raphaeldutra]

Hello guys,
Just to put a closure to this one. I flashed the BIOS and it went back to normal.
Cheers!