HI All and thanks for reading firstly new build Spec
Seasonic 850FX
Asus ROG Strix Z390-F
I7 8086K
AIO Masterliquid lite 240
Corsair Vengenance 2x8GB DDR4 3000Mhz
MSI 1060 Armor 6gb OCV1
Samsung SSD
Problems are driving me crazy as follows
Everything fine until GPU demand then :
On Furmark
Runing Preset 1080 sometimes freezes and crashes out
Reduced power (using Afterburner) furmark runs but freezes although when it unfreezes the percentage complete has continued once complete it leaves PC running super slow (click and wait 10 to 15 seconds) but no demand of anything in task monitor reported. after 10 mins black screen then back to normal running.
Novabench freezes after running the graphics test for a short time
Message - there was a problem running this test re install etc...
Task monitor nb3d.exe -not responding
Have had windows messages
Application has been blocked from accessing graphics hardware
On fortnite
well defined red spots on lobby screen - crash soon after starting
Beam ng
When game play screen starts large blocks of colour shading appear like maybe 15 and mostly stay - followed by crash
Temperatures all fine GPU (MSI afterburner) less than 60
Prime 95 runs fine to test CPU
have tried old and new drivers for the GPU , updated Motherboard Bios , removed Realtek sound drivers.
Is there a BIOS setting i am missing?
Is Graphics card roasted? it's the only secondhand component.
any help, clues, or ridicule appreciated
Seasonic 850FX
Asus ROG Strix Z390-F
I7 8086K
AIO Masterliquid lite 240
Corsair Vengenance 2x8GB DDR4 3000Mhz
MSI 1060 Armor 6gb OCV1
Samsung SSD
Problems are driving me crazy as follows
Everything fine until GPU demand then :
On Furmark
Runing Preset 1080 sometimes freezes and crashes out
Reduced power (using Afterburner) furmark runs but freezes although when it unfreezes the percentage complete has continued once complete it leaves PC running super slow (click and wait 10 to 15 seconds) but no demand of anything in task monitor reported. after 10 mins black screen then back to normal running.
Novabench freezes after running the graphics test for a short time
Message - there was a problem running this test re install etc...
Task monitor nb3d.exe -not responding
Have had windows messages
Application has been blocked from accessing graphics hardware
On fortnite
well defined red spots on lobby screen - crash soon after starting
Beam ng
When game play screen starts large blocks of colour shading appear like maybe 15 and mostly stay - followed by crash
Temperatures all fine GPU (MSI afterburner) less than 60
Prime 95 runs fine to test CPU
have tried old and new drivers for the GPU , updated Motherboard Bios , removed Realtek sound drivers.
Is there a BIOS setting i am missing?
Is Graphics card roasted? it's the only secondhand component.
any help, clues, or ridicule appreciated