MSI 970 Gaming Motherboard problems

[srapollo1911]

Recently I bought this motherboard for a nice upgrade and I used pcpartpicker.com to check for compatability. Now when I installed it everything seemed to be running fine except my monitor wasnt getting anything. Please help me troubleshoot so I can get my computer up and running .
Specs
Cpu:AMD - FX-6200 3.8GHz 6-Core Processor
Motherboard:MSI - 970 GAMING ATX AM3+ Motherboard
Graphics Card:Zotac - GeForce GTX 750 Ti 2GB Video Card
Power Supply:Thermaltake - Smart 500W 80+ Certified ATX Power Supply
Ram:Super Talent - 4GB (2 x 4GB) DDR3-1333 Memory
Monitor:HP - 22cwa 21.5" 1920x1080 60Hz Monitor

 

[rocktalkrock]

1. Double check your RAM is pushed down all the way in their slots, at both ends.
2. If it still does not boot, clear the CMOS.
3. If that does not help, boot with only 1 stick of RAM. Try one, then the other.

 

[srapollo1911]

1. Double check your RAM is pushed down all the way in their slots, at both ends.
2. If it still does not boot, clear the CMOS.
3. If that does not help, boot with only 1 stick of RAM. Try one, then the other.

I have tried everything with my ram but I have not cleared CMOS I will have to try that.

 

[srapollo1911]

1. Double check your RAM is pushed down all the way in their slots, at both ends.
2. If it still does not boot, clear the CMOS.
3. If that does not help, boot with only 1 stick of RAM. Try one, then the other.

None of that worked

 

[rocktalkrock]

1. Double check your RAM is pushed down all the way in their slots, at both ends.
2. If it still does not boot, clear the CMOS.
3. If that does not help, boot with only 1 stick of RAM. Try one, then the other.

None of that worked

1. Is the power indicator light on the monitor lit up?
2. Is the monitor connected by HDMI or VGA?
3. Have you double checked the video card is seated properly in the x16 slot?
4. Have you tried booting with the video card in the 2nd x16 slot?

 

[srapollo1911]

1. Double check your RAM is pushed down all the way in their slots, at both ends.
2. If it still does not boot, clear the CMOS.
3. If that does not help, boot with only 1 stick of RAM. Try one, then the other.

None of that worked

1. Is the power indicator light on the monitor lit up?
2. Is the monitor connected by HDMI or VGA?
3. Have you double checked the video card is seated properly in the x16 slot?
4. Have you tried booting with the video card in the 2nd x16 slot?

Yea the monitor works and everything, Its through hdmi and I also tried VGA and I alos treid the graphics card in both the slots.

 

[rocktalkrock]

1. Double check your RAM is pushed down all the way in their slots, at both ends.
2. If it still does not boot, clear the CMOS.
3. If that does not help, boot with only 1 stick of RAM. Try one, then the other.

None of that worked

1. Is the power indicator light on the monitor lit up?
2. Is the monitor connected by HDMI or VGA?
3. Have you double checked the video card is seated properly in the x16 slot?
4. Have you tried booting with the video card in the 2nd x16 slot?

Yea the monitor works and everything, Its through hdmi and I also tried VGA and I alos treid the graphics card in both the slots.

I'm out of ideas. Have you looked over Tom's checklist of troubleshooting ideas for "No POST", "system won't boot", and "no video output"?

http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems