Hello,
Today I received parts for my new gaming system (sans water cooler, using the stock heatsink+fan until then), however I'm experiencing problems with the setup. The specs are as follows:
- MSI 990FXA-GD65
- AMD FX-6300 CPU
- GSKILL 16GB (2x8GB) 1866MHz DDR3 RAM
- Kingston SSDNow V300 120GB SSD
- 2x MSI GeForce GTX 660 Ti
- EVGA NEX750B1 PSU
- BitFenix Comrade case
Upon powering on (after assembly), the Phase Indicator only has the first two LEDs lit up (Phase 2 Power Mode, according to the manual). No output is displayed on screen. I've tried removing and re-inserting the CPU and removing one of the graphics cards, to no avail.
I would appreciate any help/advise that could be offered, that I might get this system up and running!
Kind Regards
Today I received parts for my new gaming system (sans water cooler, using the stock heatsink+fan until then), however I'm experiencing problems with the setup. The specs are as follows:
- MSI 990FXA-GD65
- AMD FX-6300 CPU
- GSKILL 16GB (2x8GB) 1866MHz DDR3 RAM
- Kingston SSDNow V300 120GB SSD
- 2x MSI GeForce GTX 660 Ti
- EVGA NEX750B1 PSU
- BitFenix Comrade case
Upon powering on (after assembly), the Phase Indicator only has the first two LEDs lit up (Phase 2 Power Mode, according to the manual). No output is displayed on screen. I've tried removing and re-inserting the CPU and removing one of the graphics cards, to no avail.
I would appreciate any help/advise that could be offered, that I might get this system up and running!
Kind Regards