Hi! I'll start with my PC build:
MOBO: MSI A320M Gaming Pro
CPU: AMD Ryzen 3 1200
GPU: PNY Geforce GTX 1050 Ti 4gb
PSU: EVGA 500 W1, 80+ WHITE 500W
RAM: Ballistix Sport LT 8GB Kit (4GBx2) DDR4 2400 MT/s
Hard drive: WD Blue 1TB SATA 6 Gb/s 7200 RPM 64MB Cache 3.5 Inch
I just built the computer yesterday, and after the instillation process was finished I got no BIOS to boot and no display whatsoever. Also, the power button will turn the PC on but not off.
I have reseated pretty much everything possible on the board, tried running it with just one RAM stick in, cleared the CMOS, and ensured all connections are correct/secure to the motherboard all without any luck.
I don't have any spare compatible parts to try and narrow down the issues by testing the parts individually, so I'm a bit lost on what to try next.
Any help would be greatly appreciated, and thank you in advance for all advice!
MOBO: MSI A320M Gaming Pro
CPU: AMD Ryzen 3 1200
GPU: PNY Geforce GTX 1050 Ti 4gb
PSU: EVGA 500 W1, 80+ WHITE 500W
RAM: Ballistix Sport LT 8GB Kit (4GBx2) DDR4 2400 MT/s
Hard drive: WD Blue 1TB SATA 6 Gb/s 7200 RPM 64MB Cache 3.5 Inch
I just built the computer yesterday, and after the instillation process was finished I got no BIOS to boot and no display whatsoever. Also, the power button will turn the PC on but not off.
I have reseated pretty much everything possible on the board, tried running it with just one RAM stick in, cleared the CMOS, and ensured all connections are correct/secure to the motherboard all without any luck.
I don't have any spare compatible parts to try and narrow down the issues by testing the parts individually, so I'm a bit lost on what to try next.
Any help would be greatly appreciated, and thank you in advance for all advice!