MSI B350 Tomahawk EZ Debug lights

[thedonsimmer]

This is a brand new build Looking for reasons as to why I have no display.
At start this computer computer build was a Ryzen 7 2700X, MSI B350 Tomahawk, EVGA GeForce 1050TI SSC, EVGA 600W 80+ power supply and G.Skill Fortis 8GB (have 16 but just trying to get this going). The computer comes on with all the lights and no display. I then did a compatibility check on PC parts Picker and the CPU and MOBO was not compatible so I swapped the processer with an old A8-9600 that I had and now Im getting a CPU ez-sebug light then that light goes out and goes to DRAM light then back to CPU and repeats the cycle over and over have had the computer running for 20 mins now and still no boot to BIOS.

 

[alexoiu]

Have you inserted the RAM module all the way in (some require more force)? What exact RAM model using?

 

[thedonsimmer]

RAM is inserted all the way and I am using G.Skill Fortis 8GB I think the model number is F4-24--C15D-16GFT.
I have also tried Corsair Vengeance LPX 2400 that I found out was not compatible. So i swapped it out.
Have tried both sticks in slots 2 and 4 and single stick in all 4 slots both on there own to rule out dead stick. And have reset the CMOS a couple times.

 

[alexoiu]

It could be a board, or CPU issue. I'd RMA them both.

 

[R_K]

This is a brand new build Looking for reasons as to why I have no display.
At start this computer computer build was a Ryzen 7 2700X, MSI B350 Tomahawk, EVGA GeForce 1050TI SSC, EVGA 600W 80+ power supply and G.Skill Fortis 8GB (have 16 but just trying to get this going). The computer comes on with all the lights and no display. I then did a compatibility check on PC parts Picker and the CPU and MOBO was not compatible so I swapped the processer with an old A8-9600 that I had and now Im getting a CPU ez-sebug light then that light goes out and goes to DRAM light then back to CPU and repeats the cycle over and over have had the computer running for 20 mins now and still no boot to BIOS.

Did you manage to solve the issue ??