Msi b450 gaming pro carbon EZ DEBUG LEDS BLINK

[marcelocb012]

I recently build my new pc. And i wasn't getting issues until yesterday when cpu and gpu ez debug leds started to blink. My pc runs and shows signal but i was wondering if this means anything at all. It didn't use to do that. Also my leds wont turn as they used to now i need to manually turn them on in mysticlight app.

Specs
Ryzen 2600
Corsair vengeance rgb pro 16gb
Rx 470 g1 4gb
Psu b500w evga
Mobo MSI B450 GAMING PRO CARBON

 

[scout_03]

did you do any other change in the build like a overclock i would rest bio to see .

 

[marcelocb012]

did you do any other change in the build like a overclock i would rest bio to see .

I already reset bios. And only do XMP ot memory

 

[scout_03]

remove axmp and see if led still blink if it does try to memtest ram .

 

[marcelocb012]

remove axmp and see if led still blink if it does try to memtest ram .

i already tried to remove amxp and it still blinks. Gpu and cpu blink

 

[scout_03]

do the blink goes off when system run or only blink at start up .

 

[marcelocb012]

do the blink goes off when system run or only blink at start up .

just at the start up

 

[scout_03]

so all 4 led should be up at start up and goes off i would check board power connector for the mystic light seee if ther is any update on live update for the board you might also need to check psu .

 

[marcelocb012]

so all 4 led should be up at start up and goes off i would check board power connector for the mystic light seee if ther is any update on live update for the board you might also need to check psu .

ez debug leds turn off when system is running. But the mobo leds wont turn on until I manually turn them on.
This didnt used to happen.

 

[scout_03]

see this for the mystic led https://forum-en.msi.com/index.php?topic=300222.0

 

[marcelocb012]

see this for the mystic led https://forum-en.msi.com/index.php?topic=300222.0

I reinstall and now rgb led works fine

 

[scout_03]

great if you have any other issue come back .

 

[marcelocb012]

great if you have any other issue come back .

ez debugs still blink. What should i do? (RGB works fine now)

 

[scout_03]

they blink at start and goes off if this is what happens your ok .

 

[marcelocb012]

they blink at start and goes off if this is what happens your ok .

When i press the power button all system turns on and the cpu and gpu ez debug leds blink once then all runs ok

 

[scout_03]

so when it run there off that ok .

 

[marcelocb012]

so when it run there off that ok .

Runs ok

 

[marcelocb012]

they blink at start and goes off if this is what happens your ok .

I spend like 3 or 4 hours trying to fix this, mounting my pc again. And installing every driver. And realised my cpu is stuck to the mobo

 

[scout_03]

there his a clip that hold cpu in the socket made sure it is aling with the gold triangle and arrow on cpu socket on board let hope you did not bent or broke a pin on it .

 

[marcelocb012]

there his a clip that hold cpu in the socket made sure it is aling with the gold triangle and arrow on cpu socket on board let hope you did not bent or broke a pin on it .

My pc is running on so it's the cpu is mount properly but now I can't take it off

 

[scout_03]

you have to do the reverse process as show in the video https://www.youtube.com/watch?v=Xv89nhFk1vc

 

[marcelocb012]

you have to do the reverse process as show in the video https://www.youtube.com/watch?v=Xv89nhFk1vc

I have done the exact same thing but when I try to remove the cpu it seems like it's stuck into the mobo

 

[scout_03]

you could gently use a lens screwdriver and try to lift it on each side a bit have to be lift flat to avoid bent pins or broke ones .