Hi everyone
So I posted last week re my rig and if it was ok to power games via meta 2.( As elite dangerous was glitching )
So I updated the bios to latest one as per here
.
That seemed to go ok however the bios interface had changed to a less nicer version ( not sure why, from the red one on the manuals to a blue / grey less sexy one ).
I then changed the ram settingsto the correct ram speed, and I also tried one of the presets in the xmp . Loaded ok then after a new reset, there's no display. I've tried with the GPU hdmi the pc hdmi nothing . Opened up the rig and the sdram led light is solid .
Tried reset CMOS still same issue .
When it turns on, it's sounds normal like wall the fans kick in, then some of the fans stop ( I think it's the gpu fans ) power lights on but nothing happening .
I've even in a last ditch attempt , to do a usb windows install but can't get anything to appear on monitor .
Anyone any ideas ?
Spec is here but this was done before the latest bios update I did
CPU: AMD Ryzen 5 2600X (Pinnacle Ridge, PiR-B2)
3600 MHz (36.00x100.0) @ 2733 MHz (27.33x100.0)
Motherboard: MSI B450I GAMING PLUS AC (MS-7A40)
BIOS: A.60, 03/06/2019
Chipset: AMD B450 (Low-Power Promontory PROM26.A)
Memory: 16384 MBytes @ 1066 MHz, 15-15-15-36
NVIDIA GeForce RTX 2070, 8192 MB GDDR6 SDRAM
Drive: ADATA SX6000PNP, 500.1 GB, NVMe
Sound: NVIDIA TU106 - High Definition Audio Controller
Sound: AMD Zen - HD Audio Controller
Network: RealTek Semiconductor RTL8168/8111 PCI-E Gigabit Ethernet NIC
Network: Intel Dual Band Wireless-AC 3168
Network: TP-Link Wireless USB Adapter
OS: Microsoft Windows 10 Home (x64) Build 19045.2604
So I posted last week re my rig and if it was ok to power games via meta 2.( As elite dangerous was glitching )
So I updated the bios to latest one as per here
.
That seemed to go ok however the bios interface had changed to a less nicer version ( not sure why, from the red one on the manuals to a blue / grey less sexy one ).
I then changed the ram settingsto the correct ram speed, and I also tried one of the presets in the xmp . Loaded ok then after a new reset, there's no display. I've tried with the GPU hdmi the pc hdmi nothing . Opened up the rig and the sdram led light is solid .
Tried reset CMOS still same issue .
When it turns on, it's sounds normal like wall the fans kick in, then some of the fans stop ( I think it's the gpu fans ) power lights on but nothing happening .
I've even in a last ditch attempt , to do a usb windows install but can't get anything to appear on monitor .
Anyone any ideas ?
Spec is here but this was done before the latest bios update I did
CPU: AMD Ryzen 5 2600X (Pinnacle Ridge, PiR-B2)
3600 MHz (36.00x100.0) @ 2733 MHz (27.33x100.0)
Motherboard: MSI B450I GAMING PLUS AC (MS-7A40)
BIOS: A.60, 03/06/2019
Chipset: AMD B450 (Low-Power Promontory PROM26.A)
Memory: 16384 MBytes @ 1066 MHz, 15-15-15-36
- 8192 MB PC25600 DDR4 SDRAM - G.Skill F4-3200C16-8GVGB
- 8192 MB PC25600 DDR4 SDRAM - G.Skill F4-3200C16-8GVGB
NVIDIA GeForce RTX 2070, 8192 MB GDDR6 SDRAM
Drive: ADATA SX6000PNP, 500.1 GB, NVMe
Sound: NVIDIA TU106 - High Definition Audio Controller
Sound: AMD Zen - HD Audio Controller
Network: RealTek Semiconductor RTL8168/8111 PCI-E Gigabit Ethernet NIC
Network: Intel Dual Band Wireless-AC 3168
Network: TP-Link Wireless USB Adapter
OS: Microsoft Windows 10 Home (x64) Build 19045.2604